Do you inspect a part if I only have a photo?

Yes. A clear photo plus one or two key dimensions is enough for a feasibility check. For final production we ask for the physical sample so we can 3D-scan it, separate worn from functional surfaces, and build a CAD model from real geometry.

What tolerance can you hold for reverse-engineered parts?

CNC machined metal and plastic parts are held to plus or minus 0.05 millimeter on critical features and plus or minus 0.1 millimeter general. 3D-printed prototypes are typically plus or minus 0.1 to 0.2 millimeter. Rubber and silicone molded parts are verified by first article inspection to functional fit.

Do I get a material certificate with a replacement part?

Yes, when material matters. For production parts we can provide a material certificate of analysis, hardness test report, XRF material identification when the original datasheet is lost, First Article Inspection report, and a scan-to-CAD deviation summary.

What if the original discontinued part is badly worn or broken?

We do not copy a worn surface blindly. We identify datums and mating features, separate worn surfaces from functional ones, reconstruct the intended geometry from symmetry and standard sizes, and confirm reconstructed dimensions with you before production.

Can you improve the original design during reverse engineering?

Yes, within reason. We commonly upgrade material grade and weak sections while keeping mounting patterns, shaft sizes, bolt circles, and interface dimensions OEM-correct unless you request a change.

Do you do one-piece prototypes for obsolete parts?

Yes. Most reverse-engineering jobs start with one piece: 3D scan, CAD reconstruction, single CNC or 3D-printed unit, fit check on your machine, then small batch. Minimum order quantity of one is standard for discontinued spare parts.

How fast can a reverse-engineered part be ready?

Most mechanical parts are ready in 7–15 business days after sample receipt. Rush service (3–7 business days) is available. Electronics-adhesive die-cuts often ship faster.

Is a reproduced part as good as the OEM original?

In most cases yes, and often better. We can upgrade material grade, tighten tolerances, or improve surface finish based on how the part actually wears. Dimensional inspection reports ship with every order.

What if the OEM released a revised version after mine?

We can incorporate the OEM's design revision into your reproduction—without the OEM lead time, tooling cost, or minimum order quantity.

Can you make multiple copies for spares?

Yes. Most maintenance teams order 3–5 units: one for immediate repair, the rest as strategic spares to avoid repeat downtime.

What is the minimum order quantity?

One piece. We regularly produce single-unit reproductions for legacy equipment with no OEM support, plus low-volume runs of 10–50 pcs.

Fujifilm X100V Light Seal — Viewfinder Wool

Custom reverse engineering, non-drawing part reproduction, and complete internal auxiliary material kits for legacy, discontinued, and new electronics.

A collage showing various electronic and circuit board manufacturing materials and components, including copper foil rolls, silver and copper sheets, adhesive strips, stencil templates, and a keyboard layout sample, on a white background with a 'MoreMaking' watermark.

Fujifilm X100V Viewfinder Light-Blocking Wool — Black Flocked Foam for XT4/XT5/GFX

After Fujifilm X100V or XT4 disassembly (sensor cleaning, shutter replacement, LCD repair), the black flocked light-blocking wool around the viewfinder and body joints loses adhesion. Light leaks into the optical viewfinder, ruining framing in bright daylight.

MoreMaking reproduces black flocked light-blocking wool for Fujifilm X100V, XT4, XT5, and GFX series. We use PORON foam with flocked black surface that absorbs stray light. Each set includes viewfinder wool + body joint foam strips.

Bullet Points

• PORON foam with black flocked surface — absorbs 99% of stray light
• Pre-cut set: viewfinder wool + body joint foam
• Fits X100V, XT4, XT5, GFX 50R/100S
• Fixes viewfinder light leaks after disassembly
• Also for Olympus E-M5 series (separate SKU)

FAQ

Q: Will this fix viewfinder light leaks?
A: Yes, re-wooling the viewfinder channel eliminates stray light.

Q: Does it fit X100F?
A: Yes, different SKU.

Q: Is the wool self-adhesive?
A: Yes, with acrylic backing.

Fujifilm X100V Viewfinder Light-Blocking Wool — Black Flocked Foam for XT4/XT5/GFX

Contact form

Your cart is empty

Your cart is empty

Country/Region

Country/Region

Fujifilm X100V Viewfinder Light-Blocking Wool — Black Flocked Foam for XT4/XT5/GFX

Contact form